Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Manual de usuario descargar pdf (Pagina 10)

3.1.3 LED Behaviour

The option has 3 bi-coloured LEDs according to ODVA specifications:

LED Label Description

MS Module Status

NS1 Network Status Ethernet Port 1

NS2 Network Status Ethernet Port 2

The option LED’s operates according to ODVA specifications.

State LED Description

No power Off The device is un-powered

Device operational Green:

Solid green The device is operational

Standby Green:

Flashing green The device needs commissioning

Minor fault Red:

Flashing red The device has detected a recoverable fault

Major fault Red:

Solid red The device has detected an un-recoverable fault

Self test

Red:

Flashing red/green The Modbus TCP option is in self-test mode

Green:

No IP address

Yellow

Steady yellow No IP address configured or obtained

Wink Yellow

Flashing yellow Flash for 20 seconds

Table 3.1: MS: Module Status

State LED Description

No IP-address (no power) Off No link present (or is un-powered)

Connected Green:

Solid green

There is established (at least) one CIP connection to

the device

Duplicate IP Red:

Solid red

The IP-address assigned to the device is already in

use

Self test

Red:

Flashing red/green The Modbus TCP is in self-test mode

Green

Device has been winked Yellow Flashing yellow Flash for 20 seconds

Link present at 10 Mbps Yellow

Steady yellow Link present; but nor winked and no ACD

Table 3.2: NS1 + NS2: Network Status (one per port)

Modbus TCP

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

Comentarios a estos manuales

Sin comentarios

Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option